FAIL (the browser should render some flash content, not this).
queens park nw6 central heating installation

Now is the best time for You to have your central heating installation in Queens Park Nw6 done!  

 

In the coldest months many systems breakdown and heating service providers can’t see you immediately as they will be too busy repairing in. Other months are the best time to get your central heating up to speed.

FAIL (the browser should render some flash content, not this).
central heating queens park nw6
central heating installation service queens park

We install all kind of boilers and carry out regular boiler installation work in Queens Park Nw6. Our prices are fair and consistent for the labour and materials. We keep central heating installation cost down while providing the highest quality service every time.

central heating
queens park nw6 gas central heating installation

When You planning upgrade Your system, always you have to find a professional and experienced team otherwise you will have poisoning and poorly installed gas central heating installation – SO WE ARE HERE...

queens park nw6 central heating installation _____central heating installation

 

Our highly qualified GAS SAFE and CORGI registered installers with huge experience of many types central heating installations can assure Your peace of mind.

We provide a minimum of 2 years guarantee for all our boiler and
new pipework installations, increasing up to 5 years for some boiler models.

The first step towards installation is determining what system is right for you (look on the right) . We can send qualified technicians to assess your property in person at a time convenient for you, before drawing up an accurate quotation based on your discussion. This means that you can ask us any questions about our service or advice as to your system there and then, face to face.

We'll do everything we can to keep our prices competitive, and part of this is ensuring that boilers of any kind are installed properly – this gives you 15 – 20 years of problem free central heating when maintained annually.

At Pure Energy Project Limited  we can fit any boiler imaginable, as long as they're of a proven quality, including regular, floor standing, combination and unvented boiler systems. All of our work is covered too so that if a boiler we've installed were to have an unlikely breakdown, we'd or manufacturer service man be there within 24 hours to put it right.

 

For a free non-obligatory quote for a central heating installation, please complete the online enquiry form or call

07843 676 480

 

nw6 gas central heating installation queens park

 

gas central heating installation nw6 queens park

Central Heating Installation Service in Queens Park Nw6

central heating installation service

gas central heating installer queens park

Central Heating Installation Types

Open Vented systems with a Conventional Boiler/Back Boiler

This usually includes a boiler, hot water cylinder in an airing cupboard, big and small water tanks in the loft or top floor and the radiators. Water is heated by the boiler, sent through the cylinder where the heat is given off to the tap water that you draw off in the kitchen or bathroom......

Central heating water is heated by the boiler and diverted to the radiators. This system is open vented as expanding water due to temperature can rise and fall through the open vent in the loft. This is a very common way central heating is installed and works very well if installed correctly.

They are especially good in houses where there are a large number of radiators or showers/bathrooms. If your boiler isn’t working then you may have an immersion heater on your hot water cylinder that will provide you with hot water until you get it fixed.

Sealed Systems with a conventional boiler

Sealed systems are very similar to open vented systems but instead of having a small feed and expansion tank in the loft you should have an expansion vessel somewhere on the pipe work or built into the boiler. These are usually red and resemble a large watermelon in size....

These systems must be pressurised using cold water from the mains and usually require a minimum of 1 bar of pressure. They work well as they reduce the chance of air being pulled into the system and reduce the chances of an airlock. Not all boilers can be installed on a sealed system and should be checked with the manufacturer.

Sealed Systems with a Combi Boiler

Combi boilers are a common way of providing hot water and heating as the boiler houses the components to heat both the hot water and central heating. No water is stored as the boiler fires and heats the water on the turn of a hot tap....

These are usually installed in flats and houses with no more than 2 showers/bathrooms. They rely on water pressure from the mains to drive hot water through the taps.

Sealed Systems with a pressurised unvented water cylinder

These are becoming ever more popular. Basically this is a sealed system but with a pressurised water cylinder (common makes include Megaflow, Glow-worm). Mains pressure water is stored in the cylinder and is driven to the taps....

The advantage of these systems is that, with good water pressure coming into the property, one can store a large volume of hot water, serve multiple draw offs under mains pressure where a combi boiler might struggle. These must be installed and notified by a qualified engineer to ensure that the safety features are set up correctly.

_____________________________________________________

 

When You are happy from our service You can recommend Us on: Facebook or Twitter... THANKS

 

Copyright © 2010. Pure Energy Project Limited
site map