Pure Energy ProjectElectrical · Heating · Plumbing
07825 268 434
Boiler installation · Fulham SW6
The right boiler. The work around it done properly.
Vaillant & Viessmann Registered InstallersExtended manufacturer cover included on qualifying installations.
A replacement boiler should suit the home you have today — including the extra bathroom, the extended kitchen and the heating system already behind the walls.
PEP installs boilers across Fulham SW6, from straightforward combi replacements to conversions, relocations and installations with separate hot-water cylinders. We bring together appliance selection, system preparation, compatible controls and careful commissioning.
Every PEP boiler replacement includes a full-system PowerFlush, with the installation scope and applicable manufacturer protection explained in your quotation.
Gas Safe registered business · Vaillant & Viessmann Registered Installers · Extended manufacturer cover included on qualifying installations · Full-system PowerFlush included
Manufacturer-registered installation · Fulham SW6
Longer manufacturer protection.
No extra warranty charge.
PEP is a Vaillant Advance Installer and a Viessmann Trained Installer. For your Fulham home, we specify the appliance and the qualifying manufacturer-protection package together. The extended guarantee or warranty confirmed in your quotation is included at no additional cost, and PEP arranges registration.
Up to 10 years’ manufacturer guarantee
Available on eligible Vaillant boilers with the required protection package and registration. We confirm the exact term and any qualifying accessories before you accept the quotation.
Agreed extended cover included — no additional warranty fee.
Up to 12 years’ manufacturer warranty
Available on eligible Vitodens models and qualifying installation packages. Other appliances may carry a different term; your quotation confirms the specific cover included.
Agreed extended cover included — no additional warranty fee.
The maximum term is not available on every model. Eligibility depends on the appliance, required accessories, the manufacturer scheme in force and timely registration. Manufacturer terms and annual servicing requirements apply. Annual servicing is a separate service, not included in the manufacturer guarantee or warranty.
A complete scope, clearly explained
A useful quotation explains more than which boiler will be fitted. It should identify the work needed to connect it properly to your home.
Our replacement scope brings together:
Relocating the boiler, replacing a cylinder or upgrading existing pipework can change the scope. We identify these requirements before work starts, so you understand what is included and what remains in place.
Choose around the household
The best choice depends on how your household uses heating and hot water, not simply the number of bedrooms.
For a family home where several outlets may be used together, a system boiler with a correctly selected cylinder may be more suitable.
Cylinder capacity, recovery performance, available space and the water supply all matter. Where existing equipment is serviceable and compatible, replacing the boiler does not automatically mean replacing every other component.
Where stored hot water forms part of the project, our cylinder installation and replacement in Fulham explains how the cylinder, supply and retained boiler are assessed together.
Our guide to vented-to-unvented hot-water conversions explains the considerations when changing the stored-water arrangement.
A combi supplies heating and produces hot water on demand, without a separate hot-water cylinder. It can be a practical choice for a Fulham flat or smaller house where available space matters.
However, cupboard space is only part of the decision. We assess incoming water performance, the outlets you expect to use together and the appliance’s hot-water capacity.
A higher boiler rating cannot compensate for an inadequate incoming water supply. Nor does the output needed for a shower necessarily reflect the heat required to warm the property.
A modern regular, or heat-only, boiler can remain an appropriate option where the existing system arrangement suits the property.
We assess whether retaining it is sensible or whether a conversion offers a worthwhile improvement. The recommendation should follow the condition and requirements of the installation, rather than an assumption that every home needs a combi.
Define the work before it starts
Keeping the same broad arrangement can limit disruption. Even so, the new appliance must suit the available space, connections, flue arrangement and service clearances.
We also check the condition of the heating circuit. A new boiler should not simply inherit unresolved circulation problems.
Removing a cylinder and redundant tanks can release useful space. The conversion also changes how hot water is supplied and may require alterations to gas, water and heating pipework.
Before recommending it, we assess whether the proposed combi can support the household’s actual demand. Read more about conventional-to-combi boiler conversions.
A kitchen extension or revised layout may make the existing position inconvenient.
The new location needs a workable flue route, condensate drainage, suitable services and access for future maintenance. These details are best agreed before cabinetry and finishes are finalised.
Where the project also involves bathrooms, kitchens or wider pipework changes, our plumbing installation service in Fulham can form part of the coordinated scope.
The home sets the brief
In a converted property, the available installation space may be straightforward while access and pipework routes are not.
We establish which equipment serves your flat, where services run and whether proposed work involves shared areas. Freeholder or managing-agent requirements should be resolved before installation, particularly where the flue position or external appearance will change.
A heating system may have acquired extra radiators, another bathroom or an underfloor-heated extension over time.
That makes a replacement an opportunity to review the complete arrangement. We consider the changed demand, existing zones and controls before deciding whether the current boiler specification still makes sense.
Where several bathrooms and stored hot water are involved, boiler selection is only part of the design.
We review the cylinder, circulation, controls and service access together. A more powerful appliance is not a substitute for a properly coordinated installation.
Not every apartment has an individual gas boiler. Some buildings use communal heating or heat interface units.
We confirm the arrangement before recommending replacement work and establish the boundaries between the private installation and building-managed services.
Prepare the circuit for a new boiler
A new boiler connects to the water circulating through the existing heating system. Sludge and debris elsewhere in that circuit can affect circulation and contaminate new equipment.
PEP includes a full-system PowerFlush with every boiler replacement, together with suitable magnetic protection, inhibitor and water-condition checks before handover.
The survey establishes the condition and extent of the circuit. Older components, vulnerable pipework and shared systems require particular care; any limitations affecting safe cleaning are explained before work proceeds.
Cleaning is not a substitute for repairing a failed valve, resolving a pipework restriction or correcting an unsuitable layout. We distinguish those problems so the installation addresses the cause, not just the visible symptom.
Learn more about our PowerFlush service in Fulham.
More than a thermostat
A smart thermostat and a properly integrated heating system are not necessarily the same thing.
We check how the selected controls communicate with the appliance, what equipment can be retained and how existing heating zones should operate. Suitable modulating or weather-compensating controls may form part of the specification, depending on the boiler and system.
Where radiators and underfloor heating share a heat source, the arrangement must account for their different operating requirements. Adding another thermostat alone does not resolve the hydraulic design.
Our guide to smart heating controls explains these options in more detail.
For projects extending beyond an appliance replacement, we also undertake central heating and plant-room installation in Fulham.
Where the refurbishment also changes circuits, lighting or control wiring, our Fulham electrical installation service can be included in the agreed scope.
From our project portfolio
Our project gallery includes a completed heating and hot-water plant room serving a three-storey home in Fulham.
It provides a genuine example of PEP’s work where the installation extends beyond a single wall-mounted appliance.
That wider experience is also relevant to smaller replacements: understanding the system helps us identify which components can remain, which need attention and how the new boiler should operate with them.
You do not need a large plant-room project to work with PEP. We also install replacement boilers in flats and smaller houses.
The cost follows the scope
The main distinction is between replacing a similar appliance in the same position and changing the system around it.
Your installation cost can be affected by:
Access arrangements and building approvals can also influence the work.
PEP provides a written quotation following assessment. The aim is to make the installation scope clear enough to compare properly, including system preparation, agreed accessories, commissioning and registration.
A low headline price is difficult to evaluate if these elements are left unspecified.
Part of the agreed installation package
As Vaillant and Viessmann registered installers, we set out the qualifying manufacturer protection alongside your chosen boiler, accessories and controls. The extended guarantee or warranty agreed for your PEP installation is included in the quotation with no additional warranty charge.
We take care of registration and supply the relevant confirmation with your installation paperwork. See our installer status and included manufacturer cover ↑
Manufacturer protection is not blanket cover for the entire heating system. Existing radiators, pipework and other equipment are not automatically included. The chosen model, qualifying package and manufacturer conditions determine the cover available; annual servicing is a separate service.
Four coordinated stages
Send your postcode, current boiler details and photographs of the appliance and surrounding space. Include any cylinder and let us know whether this is a replacement, refurbishment or conversion.
We assess the installation, explain suitable options and provide the scope in writing. Any necessary alterations and access arrangements are identified before booking the work.
We agree the programme and explain the expected interruption to heating and hot water. Working areas are protected, the old appliance is removed and the agreed preparation and installation work is completed.
We carry out the relevant checks, record commissioning results and explain the controls. PEP arranges applicable notification and registers the qualifying manufacturer protection confirmed in your quotation.
Local service, connected expertise
We cover Fulham Broadway, Walham Green, Parsons Green, Eel Brook Common, the Peterborough Estate, Munster Village, Fulham Cross, Bishops Park, Hurlingham, Sands End and Imperial Wharf.
For properties near postcode boundaries, send the full address so we can confirm coverage and the appropriate service.
For our wider area, see boiler installation and replacement across London.
Before booking the work
Yes. PEP is a Vaillant Advance Installer and a Viessmann Trained Installer. We install both brands across Fulham SW6, specify the qualifying manufacturer-protection package and arrange its registration.
No. The extended manufacturer cover agreed for a qualifying PEP boiler installation is included at no additional cost. Eligible Vaillant packages can provide up to 10 years and selected Viessmann packages up to 12 years. Your quotation confirms the exact term, appliance and required accessories. Manufacturer conditions and annual servicing requirements apply; annual servicing is charged separately.
Many straightforward replacements can be completed within one working day. Relocations, conversions and installations involving a cylinder or substantial pipework take longer. We explain the expected programme after assessment.
Appointments may be available from as little as 48 hours, subject to the survey, appliance availability and our diary. This is potential appointment availability, not a promise that every installation will be completed within 48 hours.
Yes. It forms part of PEP’s boiler replacement scope, alongside suitable magnetic protection, inhibitor and water-condition checks. We assess the circuit first and explain any condition or access limitations.
Often, provided their condition, capacity and compatibility are suitable. We identify necessary changes rather than assuming the entire system needs replacement.
Possibly, but bathroom count alone is not enough. The decision depends on simultaneous use, incoming water performance and the appliance’s capacity. Stored hot water may be more appropriate for some households.
We check the appliance dimensions, required clearances, connections and service access. Some installations can retain the enclosure; others need alterations to remain practical and accessible.
We first confirm whether the apartment has its own boiler. Where it does, the work must also accommodate relevant building-management requirements and any affected shared areas.
Not necessarily. A fault in a control, valve or another part of the system does not automatically justify replacing the appliance. The cause should be established before choosing between repair and replacement.
Make a considered start
Tell us what is changing in your Fulham home — an unreliable boiler, a new bathroom, a kitchen refurbishment or a complete heating upgrade.
We will help establish the appropriate scope and explain the next step.
Send your SW6 postcode, current boiler details and a few photographs to start the conversation.